MECHANICO INSIGHTS

#workshop-safety

Articles on this topic.

EXPLORE

Articles

A technician washing their hands at a stainless steel workshop basin
Workshop safety

Used Engine Oil: Keep It Off Your Skin, Not Just the Floor

A clean workshop floor is a good start, but the oil on a rag, sleeve or glove deserves attention too. Current HSE guidance gives garages a practical reason to review skin contact during servicing. Here is a sensible check of the job, the glove choice and the wash station, without pretending that any disposable glove will do.

Sky Summer · 7 Oct 2026
A helmeted welder working on a steel bracket at a metal bench, with a nearby extraction hood
Workshop safety

Welding Fume: The Hood Has to Follow the Job

That little exhaust-bracket weld might take minutes. The fume still has to go somewhere. HSE's garage guidance says a movable extraction hood needs to sit close to the source, not merely exist in the same bay. Here is the sensible check before the next hot-work job.

Sky Summer · 3 Oct 2026
A conventional car battery connected to a charger at a ventilated workbench while a technician reads instructions
Workshop safety

The Battery on Charge Deserves Its Own Space

That ordinary 12-volt battery at the back of the workshop can be easy to forget once the charger is on. HSE's advice is a useful reminder that charging needs a ventilated place, the right kit and a calm disconnect routine. Here is a quick check for garages before the next flat-battery job.

Sky Summer · 2 Oct 2026
A mechanic checking a job sheet beside an older car with a wheel removed; an unused airline and cleaning cloth are on a trolley
Workshop safety

Brake Dust and the Airline: The Workshop Shortcut Worth Retiring

The quickest way to clear a dusty brake drum can be the wrong one. HSE says never blow brake or clutch dust out with an airline, even when you are not working on a classic. Here is a cleaner way to decide what to do before the drum comes off.

Sky Summer · 28 Sep 2026
A mechanic checking guidance beside a boxed airbag part at a garage parts counter
Workshop safety

Airbag Parts in the Garage: Check the Box Before It Joins the Shelf

A replacement airbag can arrive looking like any other boxed part. It is not one to park beside the paint tins while the job waits. HSE's guidance puts three useful questions ahead of storage, fitting and disposal: what is its classification, what does the supplier say, and where will it go?

Sky Summer · 27 Sep 2026
A detached van tyre secured in an inflation cage while a mechanic controls the airline from outside the marked work zone
Workshop safety

Van Tyre Inflation: The Pressure Check That Changes the Safety Plan

A light-commercial van tyre can look like a routine tyre-bay job, yet some run at pressures high enough to need commercial-vehicle inflation precautions. HSE's guidance is a useful prompt to check the tyre, restraint and operator position before air goes in.

Sky Summer · 26 Sep 2026
A mechanic checking vehicle-specific information beside a parked electric car, with its remote key secured away
Electric and hybrid vehicle safety

An EV in for an Ordinary Job? Make These Checks Before You Start

An electric or hybrid car does not need a battery repair to change the workshop risk. HSE's guidance gives garages a sensible starting point for routine jobs: know the vehicle, control the key, check for damage and be clear about who can do what.

Sky Summer · 25 Sep 2026
A mechanic connecting a tailpipe extraction hose to a parked car in a garage with an open bay door
Workshop safety

Workshop Exhaust Fumes: Why an Open Bay Door Is Not Enough

Running an engine indoors for a diagnostic check? The open shutter is not your exhaust control plan. Here is what HSE guidance means for a busy independent garage, and what to check before the key turns.

Sky Summer · 24 Sep 2026
A mechanic checking a pad on an empty two-post vehicle lift, with a car parked away from the lift
Workshop safety

Two-Post Lifts: The Checks Worth Making Before a Car Goes Up

A lift certificate matters, but it will not spot a worn pad or a failed arm lock on this morning's job. Here is a practical check to make before anyone goes beneath the car.

Sky Summer · 23 Sep 2026
Editorial illustration of an electric van beside a workshop inspection lane, with a clipboard and tread gauge
MOT testing

Heavier Electric Vans: What the Class 7 MOT Change Means for Your Garage

Some zero-emission vans up to 4.25 tonnes have needed a class 7 MOT since June. Check the vehicle class, the weight your equipment can safely handle, and the inspection details before the next booking.

Sky Summer · 21 Sep 2026